Palm Kernel Oil Processing

1.Palm Kernel Cleaning

Palm kernel cleaning equipment is mainly used to remove iron wire, stone,fiber and other impurities in palm kernel. These impurities are easy to damage the machine, especially the palm kernel oil press.

2.Palm Kernel Crushing Equipment

Palm kernels generally need to be crushed twice, one crushing: because the palm kernel is relatively largeand hard, in order to better improve the oil yield, it needs to be crushed first. Secondary crushing: mainly tobreak the palm kernel into small pieces for easy oil extraction.

3.Palm Kernel Shell separation Equipment

Both wet separation and dry separation are available. Which separation method to use mainly depends onthe processing capacity of palm kernels, the cleanliness of separation, and the customer’s financial.

4. Palm Kernel Drying Equipment

Fresh palm kernels contain 20% moisture, and the moisture content of palm kernels must be reduced to lessthan 7% in order to store them.

5.Palm Kernel Steaming And Frying Equipment

Mainly through heating and steaming and frying, the palm kernel can achieve good oil production conditions,so that more high-quality palm kernel oil can be obtained.

6. Palm Kernel Oil Press Equipment

The palm kernel oil press is the same as the conventional oil press and can be used in general. Throughpressing, we can get crude palm kernel oil.

7. Palm Kernel Oil Filtration Equipment

Crude palm kernel oil contains a lot of impurities, and palm kernel oil filtration equipment can enable us toobtain higher quality palm kernel oil.

Palm kernel oil production process deisgn: steaming, shelling, crushing, pressing, frying,blending, kernel oil extraction, filtration.

Application: High Efficiency crude oil Pressing & Extracting From Palm Kernel With Low Oil Residual.

Solvent extraction plant is recommended for large palm kernel oil mill with high capacity. However, For thepurposes of small-scale operations it is sufficient to mention the solvent extraction process is an alternativefor high capacity palm oil mills. However the process is not recommended for small enterprises.

The Advantages Of Palm kernel Oil Press And Plants

Fit for mass production of palm kernel oil extraction;

High oil extraction rate, low oil residual in meal and high quality of meal;

Less horse power and low consumption;

Less maintenance;

Efficient and Reliable.